爆炸、核试验与天然地震的区别（英文）     

Cho  Kwang-Hyun 《应用地球物理》2014,(4):429-436

本文通过地震正演模型和面波振幅数据对比分析了天然地震、爆炸,与核试验数据,以探索改进辨别天然地震与爆炸的方法。所提方法是基于波数域和频率域的双积分变换解。用于研究的地震事件都发生在北朝鲜,其中包括2001年6月26日（39.212°N,125.383°E）和2001年10月30日（38.748°N,125.267°E）所记录的爆炸数据,2006年10月9日（41.275°N,129.095°E）所记录的一次核试验数据、以及2002年4月14日（39.207°N,125.686°E）和2002年6月7日（38.703°N,125.638°E）所记录的两次天然地震。基于这些数据通过地震波分析与理论模拟表明爆炸引起的地震与天然地震有着不同的波型特征。爆炸引起的信号特征是P波的能量较S波强,在爆炸记录上0.05-0.5Hz频率之间Rg波清晰呈现,而在然地震记录上没有。这是由于爆炸地震记录上P波是优势波,与SH成分发生了耦合。  相似文献   

Experimental validation of a signal-based approach for structural earthquake damage detection using fractal dimension of time frequency feature     

Tao Dongwang  Mao Chenxi  Zhang Dongyu  Li Hui 《地震工程与工程振动(英文版)》2014,(4)

This article extends a signal-based approach formerly proposed by the authors, which utilizes the fractal dimension of time frequency feature(FDTFF) of displacements, for earthquake damage detection of moment resist frame(MRF), and validates the approach with shaking table tests. The time frequency feature(TFF) of the relative displacement at measured story is defined as the real part of the coefficients of the analytical wavelet transform. The fractal dimension(FD) is to quantify the TFF within the fundamental frequency band using box counting method. It is verified that the FDTFFs at all stories of the linear MRF are identical with the help of static condensation method and modal superposition principle, while the FDTFFs at the stories with localized nonlinearities due to damage will be different from those at the stories without nonlinearities using the reverse-path methodology. By comparing the FDTFFs of displacements at measured stories in a structure, the damage-induced nonlinearity of the structure under strong ground motion can be detected and localized. Finally shaking table experiments on a 1:8 scale sixteen-story three-bay steel MRF with added frictional dampers, which generate local nonlinearities, are conducted to validate the approach.  相似文献   

Seismic performance of an existing bridge with scoured caisson foundation     

Kuo-Chun Chang  Yu-Chi Sung  Kuang-Yen Liu  Ping-Hsiung Wang  Zheng-Kuan Lee  Lu-Sheng Lee  Witarto 《地震工程与工程振动(英文版)》2014,(Z1)

This paper presents in-situ seismic performance tests of a bridge before its demolition due to accumulated scouring problem. The tests were conducted on three single columns and one caisson-type foundation. The three single columns were 1.8 m in diameter,reinforced by 30-D32 longitudinal reinforcements and laterally hooped by D16 reinforcements with spacing of 20 cm. The column height is 9.54 m,10.59 m and 10.37 m for Column P2,P3,and P4,respectively. Column P2 had no exposed foundation and was subjected to pseudo-dynamic tests with peak ground acceleration of 0.32 g first,followed by one cyclic loading test. Column P3 was the benchmark specimen with exposed length of 1.2 m on its foundation. The exposed length for Column P4 was excavated to 4 m,approximately 1/3 of the foundation length,to study the effect of the scouring problem to the column performance. Both Column P3 and Column P4 were subjected to cyclic loading tests. Based on the test results,due to the large dimension of the caisson foundation and the well graded gravel soil type that provided large lateral resistance,the seismic performance among the three columns had only minor differences. Lateral push tests were also conducted on the caisson foundation at Column P5. The caisson was 12 m long and had circular cross-sections whose diameters were 5 m in the upper portion and 4 m in the lower portion. An analytical model to simulate the test results was developed in the OpenSees platform. The analytical model comprised nonlinear flexural elements as well as nonlinear soil springs. The analytical results closely followed the experimental test results. A parametric study to predict the behavior of the bridge column with different ground motions and different levels of scouring on the foundation are also discussed.  相似文献   

Full-scale experimental modal analysis of an arch dam: The first experience in Iran     

《Soil Dynamics and Earthquake Engineering》2014

Forced vibration field tests and finite-element studies were conducted on the Shahid Rajaee concrete arch dam in Northern Iran to determine the dynamic properties of the dam–reservoir–foundation system. The first forced vibration tests on the dam were performed with two different types of exciter units, with a limited maximum force, bolted on the dam crest for alternative in-phase and out-of-phase sequencing. Because of an insufficient number of recording sensors, two arrangements of sensors were used to cover sufficient points on the dam crest and one gallery during tests. Two kinds of vibration tests, on–off and frequency sweeping, were carried out on the dam. The primary natural frequencies of the coupled system for both symmetric and anti-symmetric vibration modes were approximated during on–off tests in two types of sequencing of exciters, in phase and out-of-phase, with a maximum frequency of 14 Hz. The principal forced vibration tests were performed at precise resonant frequencies based on the results of the on–off tests in which sweeping around the approximated frequencies at 0.1 Hz increments was performed. Baseline correction and suitable bandpass filtering were applied to the test records and then signal processing was carried out to compute the auto power, cross power and coherence spectra. Nine middle modes of vibration of the coupled system and corresponding damping ratios were estimated. The empirical results are compared against the results from calibrated finite-element modeling of the system using former ambient vibration tests, considering the dam–reservoir–foundation interaction effects. Good agreement is obtained between experimental and numerical results for eight middle modes of the dam–reservoir–foundation system.  相似文献   

Cyclic response of saturated silts     

《Soil Dynamics and Earthquake Engineering》2014

Softening and strength loss of sands with increasing excess pore water pressure under repeated loads is well-known. However, extensive damage to the built environment also occurs at the sites underlain by fine grained soils during seismic shaking. The primary objective of this study is to investigate the factors affecting cyclic behavior of saturated low-plastic silt through laboratory testing. For this purpose, an extensive laboratory testing program including conventional monotonic and cyclic triaxial tests was carried out over reconstituted silt samples. The effects of the inherent soil properties and the effects of loading characteristics on the cyclic response of saturated low-plastic reconstituted silt samples were examined separately. Based on the test results, a model was introduced to estimate the effect of initial shear stress on the cyclic response. Besides, liquefaction susceptibility of the samples was examined via current liquefaction susceptibility criteria.  相似文献   

Shake table tests of a new steel–asphalt composite layer system for the seismic base isolation of housing units     

《Soil Dynamics and Earthquake Engineering》2014

Base isolation is an effective way to reduce earthquake energy transfer from ground to structure, but existing seismic isolation systems are not very suitable for rural buildings for some reasons. A new steel–asphalt composite layer for the seismic base isolation of housing units is present in this paper. Its dynamic characteristics and isolation effect are studied by shake table tests of two full-scale specimens. Different earthquake waves with different peak ground accelerations (PGA, from 0.1 g to 0.4 g) are input. Test results show that the isolation layer could efficiently reduce the input acceleration. Moreover, as the PGA increase, the isolation layer shows good function of the displacement limit.  相似文献   

欧亚地震带地震活动增强与中国大陆地区7级以上地震发生的关系分析     

陈学忠  李艳娥  王恒信 《地震》2014,34(1):34-40

根据欧亚地震带7级以上地震释放能量与全球7级以上地震释放总能量之比,利用χ²检验方法对欧亚地震带地震活动增强与中国大陆地区7级以上地震发生的关系进行了统计检验。结果表明,当出现欧亚带年地震释放能量比高于50%且有8级以上地震发生时,其后3年内中国大陆地区将有发生多次7级以上地震或8级地震的可能性,这个关系在10%的显著水平下通过显著性检验。  相似文献   

多通道大功率电法勘探仪集成试验   总被引：5，自引：2，他引：3       下载免费PDF全文

底青云  雷达  王中兴  张一鸣  王顺  张启卯  张文伟  欧阳涛 《地球物理学报》2016,59(12):4399-4407

采用自主研发的多通道大功率电法勘探仪进行了深部矿勘探测试.首先在河北省张家口市张北县进行了仪器整体的调试和波形测试等试验,试验结果表明,在大偏移距情况下,尽管存在50 Hz电磁干扰,也能获得与发射波形相关的波形曲线,验证了仪器系统的正确性和稳定性.然后在内蒙古曹四夭钼矿区采集了4.8km的剖面数据,并进行了相应的数据处理工作.对所采集的数据进行了大地脉冲响应计算、峰值时刻提取和视电阻率计算,以及电阻率二维反演工作,反演的的电阻率断面结构与已知地质资料相吻合,验证了数据流程和处理方法的正确性.此次多通道大功率电法勘探仪的成功集成,为进一步大规模比对试验和装备整装勘探打下了基础.  相似文献   

Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings          下载免费PDF全文

Diana Ene  Shoichi Kishiki  Satoshi Yamada  Yu Jiao  Yoshinao Konishi  Masao Terashima  Norihisa Kawamura 《地震工程与结构动力学》2016,45(2):173-192

Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Seismic design and testing of buckling‐restrained braces with a thin profile          下载免费PDF全文

Pao‐Chun Lin  Keh‐Chyuan Tsai  Chieh‐An Chang  Yu‐Yun Hsiao  An‐Chien Wu 《地震工程与结构动力学》2016,45(3):339-358

A thin‐profile buckling‐restrained brace (thin‐BRB) consists of a rectangular steel casing and a flat steel core that is parallel to a gusset plate. A thin configuration reduces the width of the restraining member and thus saves usable space in buildings. However, deformable debonding layers, which cover the steel core plate in order to mitigate the difference between the peak tensile and compressive axial forces, provide a space for the steel core to form high mode buckling waves when the thin‐BRB is under compression. The wave crests squeeze the debonding layers and produce outward forces on the inner surface of the restraining member. If the restraining member is too weak in sustaining the outward forces, local bulging failure occurs and the thin‐BRB loses its compression capacity immediately. In order to investigate local bulging behavior, a total of 22 thin‐BRB specimens with a ratio of steel core plate to restraining steel tube depth ranging from 0.3 to 0.7 and axial yield force capacities ranging from 421 kN to 3036 kN were tested by applying either cyclically increasing, decreasing, or constant axial strains. The restraining steel tube widths of all the specimens were smaller than 200 mm and were infilled with mortar with a compressive strength of 97 MPa or 55 MPa. Thirteen of the 22 thin‐BRB specimens' restraining members bulged out when the compressive core strains exceeded 0.03. A seismic design method of the thin‐BRB in preventing local bulging failure is proposed in this study. Test and finite element model (FEM) analysis results suggest that the outward forces can be estimated according to the BRB compressive strength, steel core high mode buckling wavelength, and the debonding layer thickness. In addition, the capacity of the restraining member in resisting the outward forces can be estimated by using the upper bound theory in plastic analysis. Both the FEM analysis and test results indicate that the proposed method is effective in predicting the possibility of local bulging failure. Test results indicate that the proposed design method is conservative for thin‐BRB specimens with a large steel core plate to restraining steel tube depth ratio. This paper concludes with design recommendations for thin‐BRBs for severe seismic services. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献